LPMS-CU2: 9-Axis Inertial Measurement Unit (IMU) with CAN and USB Connectivity

US$ 270

Category:

Description

The LP-RESEARCH Motion Sensor CAN bus and USB version 2 (LPMS-CU2) is a miniature inertial measurement unit (IMU) / attitude and heading reference system (AHRS). The unit is very versatile, performing accurate, high speed orientation and relative displacement measurements. By the use of three different MEMS sensors (3-axis gyroscope, 3-axis accelerometer and 3-axis magnetometer) low-drift, high-speed orientation data around all three axes is achieved. Additionally, temperature and barometric pressure allow accurate altitude measurements. LPMS-CU2 communicates with the host system either via a CAN bus or USB connection. Depending on the configuration of the sensor, data transfer rates of up to 400Hz can be reached. The LPMS-CU2 fits both machine and human motion measurements for size and cost sensitive applications.

The unit contains a 32-bit digital signal processor capable of running all calculations on-board in real-time. For more information on our sensor fusion method please refer to the IMUcore description.

LPMS-CU2’s CAN bus interface allows connecting the sensor to a larger CAN bus infrastructure. The sensor supports a minimal CANopen implementation as well as a customizable sequential CAN message format. The amount of measurement data transmitted via CAN bus can be freely configured using the LPMS-Control software.

See the LPMS-CU2 product page at LP-RESEARCH here.

DOWNLOAD DATASHEET
DOWNLOAD QUICK START GUIDE

SPECIFICATIONS

Communication interface CAN Bus, USB 2.0
Communication protocol LpCAN / CANOpen (CAN port), LpBUS (USB port)
Size 34 x 34.5 x 15.7 mm
Weight 17.6g
Orientation range Roll: ±180°; Pitch: ±90°; Yaw: ±180°
Resolution < 0.01°
Accuracy < 0. 5° (static), < 2° RMS (dynamic)
Accelerometer 3 axes, ±20 / ±40 / ±80 / ±160 m/s2, 16-bits
Gyroscope 3 axes, ±125 / ±245 / ±500 / ±1000 / ±2000 °/s, 16-bits
Magnetometer 3 axes, ± 4 / ± 8 / ± 12 / ± 16 gauss, 16-bits
Pressure sensor 300 – 1100 hPa
Data output format Raw data / Euler angle / Quaternion
Data transmission rate up to 400 Hz
Power consumption < 165 mW @ 3.3 V
Power supply 5 to 18 V DC (CAN Bus), 5 V DC (USB)
Connector DB9 female (CAN Bus), Micro USB-B (USB)
Case material ABS Plastic shell
Temperature range – 40 to +80 °C
Software C++ library for Windows, LpmsControl software and Open Motion Analysis Toolkit (OpenMAT) for Windows.

PACKAGE CONTENTS

1 x LPMS-CU2 sensor
1 x Micro USB cable
1 x User guide card
1 x Warranty service (1 year)

NOTE: Please note that import duties, taxes, and charges are not included in the item price or shipping cost. Please contact us for orders over 50 pieces.