LPMS-IG1: Ultra Low-Noise 9-Axis Inertial Measurement Unit (IMU) / AHRS with USB / CAN / RS232 Connectivity

US$ 599

Category:

Description

The LP-RESEARCH Motion Sensor LPMS-IG1 is an inertial measurement unit (IMU) / attitude and heading reference system (AHRS) in an IP67-rated enclosure (waterproof).

The unit is very versatile, performing accurate, high-speed orientation measurements. The output of three separate low-noise single-axis gyroscopes is fused with three-axis accelerometer and magnetometer data to achieve low-drift, low-latency 3D orientation information.

As the low-noise gyroscopes only support angular rates up to 400dps, we integrated an additional gyroscope for rates up to 2000dps with the device. Users can select which gyroscope they would like to use as orientation data source.

For more information on our sensor fusion method please refer to the IMUcore description. Wer offer customized algorithms for using LPMS-IG1 as dead reckoning sensor for AGV and automotive applications using a fusion of IMU vehicle odomotery data.

All sensor parameters and data transmission options can be controlled by our IG1-Control software. For direct interfacing to Windows / Linux PC or embedded system we provide extensive library support.

NOTE: LPMS-IG1 connects to a host via USB communication and either a CAN bus or RS232 connection. Please specify your preference when ordering this component.

DOWNLOAD DATASHEET
SOFTWARE DOWNLOADS

SPECIFICATIONS

Model name LPMS-IG1
Communication interface USB + CAN Bus or RS232
Communication protocol LP-BUS / CANopen (partial) / sequential CAN
Size 51 x 45 x 24 mm
Weight 76 g
Orientation range Roll: ±180°; Pitch: ±90°; Yaw: ±180°
Resolution < 0.01°
Accelerometer 3 axes, ±20 / ±40 / ±80 / ±160 m/s2, 16 bits
Gyroscope

Dual gyroscope design:

#1: 3-axis, ± 400, 24 bits

#2: 3-axis, ± 1000 / ± 2000 dps, 16 bits

Gyroscope noise density #1: 0.02 dps/√Hz, #2: 0.04 dps/√Hz
Magnetometer 3 axes, ± 4 / ± 8 / ± 12 / ± 16 gauss, 16 bits
Accuracy < 0. 1° (static), < 1° RMS (dynamic)
Static orientation stability #1: 4 °/hour, #2: 6 °/hour
Data output format Raw data / Euler angle / Quaternion
Data transmission rate 5 ~ 500 Hz
Power consumption ≤400 mW @12 V
Power supply 5 V ~ 24 V DC
Connector

Signal connector: M12

Housing/td>

Aluminum, IP67 rated
Temperature range -40 to +80 °C
Software IG1-Control software, C API library

PACKAGE CONTENTS

1 x LPMS-IG1P sensor
1 x Waterproof cable
1 x GPS antenna
1 x User guide card
1 x Warranty service (1 year)

Reviews

There are no reviews yet.

Be the first to review “LPMS-IG1: Ultra Low-Noise 9-Axis Inertial Measurement Unit (IMU) / AHRS with USB / CAN / RS232 Connectivity”

Your email address will not be published. Required fields are marked *